Nov router

Daniel

Guru
21. dec 2007
5.036
2.358
113
Tukaj:
https://openwrt.org/toh/tp-link/tl-wr1043nd

Glej navodila pod V3. Na tak način boš po opisanih 4 korakih dobil verzijo 15.05.1.

Nato posodobiš na 18.06.1 preko tega:
downloads.openwrt.org/releases/18.06.1/targets/ar71xx/generic/openwrt-18.06.1-ar71xx-generic-tl-wr1043nd-v3-squashfs-factory.bin

In še tega:
downloads.openwrt.org/releases/18.06.1/targets/ar71xx/generic/openwrt-18.06.1-ar71xx-generic-tl-wr1043nd-v3-squashfs-sysupgrade.bin

Tvoj router bo potem res postal čisto druga, resnejša mašinerija. Seveda če se ti da skozi ta postopek.


Zakaj bi dvakrat flashal 18.06.1? Meni je vedno bil dovolj samo factory in potem greš naslednjič ko nadgrajuješ s sysupgrade verzijo. Pa tudi ne vem, če mora najprej na verzijo 15, ker so nekoliko stara navodila.
 

Bajkman

Majstr
23. jun 2010
3.643
147
63
Ker če imaš zadnjo verzijo FW na V3 tega modela, potem bi se menda moralo tako. Glede na navodila. Lahko pa, da so pozabili dopisati, da lahko direkt na 18.06.1. Nisem prepričan, pa sem navedel preverjeno pot. Citiram:

For revision v3.0, stock FW 3.16.9 build 150514: With the current stock TP-Link firmware it's not possible to flash the current stable OpenWrt Chaos Calmer 15.05.1 release for v2 routers. The web interface keeps complaining, that filename and version do not match. Since the hardware of v3 is basically identical to v2, the only problem is the version check during the firmware upgrade. But there is an easy workaround:

  1. Install the current OpenWrt trunk version for v3 via the TP-Link web interface
  2. (after the reboot) Via scp upload the current OpenWrt Chaos Calmer 15.05.1 stable release for v2 to “/tmp/filename”, (e.g. with WinScp). After the reboot the router will have the ip-address 192.168.1.1 and the default OpenWrt user and password.
  3. Log in via ssh (e.g. putty) and then execute sysupgrade -n -F /tmp/filename. The sysupgrade will also complain about version mismatch (v2 vs. v3). But the -F switch forces it to flash the image anyway.
  4. Wait for the process to finish with a reboot and be happy with Chaos Calmer 15.05.1 stable. :)
Vir:
https://openwrt.org/toh/tp-link/tl-wr1043nd

Če gre direktno, potem pa toliko bolje. Pa tale video bi morda lahko bil v pomoč:
 

AvtoFun

Guru
29. dec 2007
18.131
2.256
113
Že zopet nekih 100 opcij :) Sem mislil da je stvar simpl, loadaš nov FW fail v nastavitvah in ga flasha in je to to :)