Je golf plus letnik 2013 z 1.2 TSI motorjem za kupit?

jezek

Guru
24. jul 2008
5.929
2.655
113
To je seveda namenjeno gumijasti cevi, da zdrsne na svečo, ne pa samemu kontaktu baker-sveca. Tam naj ne bi bilo nič vmes
 
  • Všeč mi je
Reactions: tony

tony

Guru
23. jul 2007
10.978
1.857
113
Hm, tale smukec se zdi najbolj enostavna rešitev, pa še zelo poceni je :zmaga:

Ne vem če sem zgoraj že pisal: za lažje natikanje kabla na svečo na VWju sem prej našel še en spletni nasvet:
Liqui Molly silikonska mast (nekaj cenejša je v Avto romi ali na Amazonu):

The grease is meant to be squeezed out of the way when the metal parts connect, sealing the surrounding area.

Lubricant with diverse application areas at all temperatures. With outstanding separation and lubrication properties, e.g. for metal/plastic pairings, high resistance to oxidation and low tendency to evaporate. It is resistant to both cold and hot water, resistant to aging and temperature stable, it seals out contamination and can be delivered by centralized lubrication systems. Can be used in slightly acidic or slightly alkaline areas. Also suitable for lubricating roller and plain bearings with low bearing pressures. Labeling according to DIN 51502 KSI2 S-40. Operating temperature range: –40 °C to +200 °C

For lubricating sliding roofs, seat guides, door hinges, linkages, etc.

Mast ni prevodna in ne opravlja vloge kontakt spreja, predvsem pa ne škoduje plastiki / gumi, na njej je narisana slika mazanja vodila šibedaha: